Image

Image

Acer E5-573TG DA0ZRTMB6D0 REV: D , No power

Tips & Trick By Indiarefix Team If need on Whatsapp Than Ping Your Name City State & Country name to +919310896575
Post Reply
suryajaved
IndiaReFix team
IndiaReFix team
Posts: 280
Joined: Mon Nov 30, 2015 2:07 pm
Cash on hand: Locked
Location: CHANDRAPUR
Has thanked: 17 times
Been thanked: 20 times

Acer E5-573TG DA0ZRTMB6D0 REV: D , No power

Post by suryajaved » Sun Oct 01, 2017 6:31 pm

Tips N Tricks :- 9
Laptop model :- ACER E5-573TG
PCB Number :- DA0ZRTMB6D0 REV: D
Problem Reported :- No power,
Observation:- Power On System After 3/4 time power Trigger
ACIN Not Present On pin72 of EC
Step:-1
Power on trigger was working, because PSU unit show some Amps consumption after power button press , but board not power up Completely, as useule in practice try to trigger 3-4 time and result was board power on Completely, now try to connect external keyboard to check that any activity on USB port is available or not , yes after pressing Num lock & Caps lock key led indicator was working accordingly, that indication of USB keyboard clear a stage that board have data processing and CPU acknowledge interrupt request by keyboard,
Step:-2
Trun Off and On PSU Power again and try to trigger, again same no power on with single trigger, Now start checking step by step supply's with Continues triggering all supply's are generated but trip , so decide step by step section checking first try to check charging section with battery , when plug battery and trun on PSU , PSU Amps consumption is 0 and first mosfet stop passing Voltage,
so start's checking charging chip requirements,
*Vcc = 17.5 v, Acdet=2.2v
Acok#=3.3v*
Complete parameters are wrong according to circuit, Due to ACOK# high PQ18 Active and get ACIN low so EC Not Detect ACIN on pin 72
Question 💡 why ( PD3) Cross 19.5v to 17.5 v, trun of power remove battery and check Impedance of PD3 output line all are found Ok,
Now Big suspect is PD3 replace PD3 and bingo now PD3 output line voltage =18.9 , Acdet=2.4
Acok# = 0 After ACOK# get Low & ACIN been high 3.3v now set is working ok
All requirements of Charging Chip & EC chip is full fill now ,
Job done ✅
pcb number.jpeg
vin.jpeg
ACIN .jpeg
fulty acdet.jpeg
IT8987E pin 72.jpeg
charging ic.jpeg
correct acdet.jpeg
You do not have the required permissions to view the files attached to this post.
These users thanked the author suryajaved for the post (total 2):
rxtxgnd01 (Sat Jun 16, 2018 8:31 pm) • vensunreddy (Wed Aug 01, 2018 5:26 pm)
Rating: 28.57%

User avatar
J D Verma
Guru
Guru
Posts: 127
Joined: Thu Jan 14, 2016 7:45 pm
Cash on hand: Locked
Location: Ludhiana PUNJAB
Has thanked: 0
Been thanked: 10 times

Re: Acer E5-573TG DA0ZRTMB6D0 REV: D , No power

Post by J D Verma » Tue Oct 03, 2017 8:52 pm

Great job
These users thanked the author J D Verma for the post:
jammesuno (Wed Oct 17, 2018 7:53 am)
Rating: 14.29%

Dammysholove
Newbie
Newbie
Posts: 2
Joined: Mon Mar 26, 2018 10:07 pm
Cash on hand: Locked
Has thanked: 1 time
Been thanked: 0

Re: Acer E5-573TG DA0ZRTMB6D0 REV: D , No power

Post by Dammysholove » Thu May 24, 2018 1:49 pm

great

Post Reply

Return to “Tips By Indiarefix Team”